Knowledge Base

How To Recover Disks Using Bootable Media in Cloud Backup

Among the ways you can recover physical or virtual computers is through any bootable media, which can be a CD, DVD, USB flash drive, or other removable media that you can use to run the Cloud Backup agent.

If you want to know how to create a bootable media using Cloud Backup, click the link below:

Once you have a bootable media, you can now recover disks using it. Read further for a detailed instruction on how to do this.


Recovering Disks by Using Bootable Media

To know how to recover disks using bootable media, follow the steps below:

  1. Turn on or boot up your computer or machine using the bootable media.
  2. Depending on the media type you’re using, click Manage this machine locally or Rescue Bootable Media twice.
  3. If your network has a proxy server enabled, you have to click Tools and then Proxy server. Next, specify your proxy server host name or IP address, and port.
    If there are no proxy server enabled, proceed to the next step.

  4. The system will then boot up and display a Welcome screen. Click the Recover option.
  5. Click Select data.
  6. Next, click Browse.
  7. Choose the relevant backup location.
    • If you want to recover from cloud storage, select Cloud storage. Then, type in the necessary account information to which the backed up machine is assigned.
    • If you want to recover from a local or network folder, click Local folders or Network folders and browse for the appropriate folder.

      Then, click OK to confirm.
  8. Choose the relevant backup where you want to recover the data. If asked, type the password for the backup.
  9. In the Backup contents, choose the disks that you want to recover and click OK to confirm.
  10. In the Where to recover element, the software will automatically map the selected disks to the target disks.
    If the mapping was unsuccessful or the result is unsatisfactory, you can manually re-map the selected disks.

    NOTE: Changing the disk layout may affect the booting capabilities of the operating system. Thus, it is recommended that you use the original disk layout of the machine.

    If you want to specify additional settings to the recovery you want to perform, click Recovery options.
  11. Click OK to start the recovery process.

Congratulations! You now know how to recover disks by using bootable media in Cloud Backup.


Additional Instructions:

If you are performing a recovery of a Linux machine, and the machine had logical volume management (LVM) and you want to implement the original LVM structure, you should do the following before you click Apply RAID/LVM:

  1. Make sure that the number of target machine disks, along with the disk capacity of each, is equal to (or more than) the ones in the original machine.
  2. Review the disk volume structure.
Did you find this article helpful?

* Your feedback is too short